China Steel Heavy Duty Narrow Series Transmission Welded Roller Conveyor Chain roller chain coupling

Merchandise Description

Product Description

Slim Sequence Welded Metal Chain

Our slim series welded metal chain refers to the welded offset sidebar chain with fairly narrower internal width. To illustrate, on this page, we largely present you our products with slender-end interior width from 28mm to 77.1mm, and outer width from 51mm-117.35mm.

This collection welded chain is specially made for conveying of CZPT materials underneath the functioning setting with strong impact or heavy dust. It is typically employed as scraper conveyor chain for the conveying for grains, bean pulp, industrial bulk cargo, and so on. The welded steel chain is also applicable for wooden processing business.

 

Solution Parameters

Chain no. Pitch P (mm) Outer diameter of bushing d1 (max.) mm Diameter of pin d2 (mm) Peak of sidebar h2 (max.) (mm) Interior width of slim conclude b1 (max.) (mm) Outer width of slim finish b2 (max.) (mm) Thickness of sidebar T (max.) (mm) Tensile strength Q (min.) (KN) Bodyweight per meter q (kg/m)
WH78 66.27 22.23 12.seven 28.4 28.4 fifty one 6.four one hundred fifty 5.9
DWR78 sixty six.27 21.2 fourteen.28 32 28.4 51 six.4 a hundred thirty six.4
DWH78 66.27 21.two fourteen.28 32 28.four 51 6.4 a hundred and seventy 6.4
WR78B sixty six.27 22.2 12.seven 28.4 28.six 51 six.4 ninety three.four five.nine
WR78H sixty six.27 25.4 14.27 32 25.four 51 nine.five 127 12.seven
WH78H 66.27 25.4 14.24 32 25.4 fifty one nine.five 158 twelve.7
WH78C 66.27 22.five twelve.seven 28.4 28.six fifty two.three 7 180 seven.1
WR78SS sixty six.27 21.2 12.7 28.four 28 52.three seven eighty five seven.1
WR82 78.one 27 fourteen.29 32 forty four 57 6.four ninety three.four five.eight
WR82R seventy eight.1 25.4 14.29 32 44 fifty seven six.4 a hundred and fifty five.75
WR82X 78.one 31.seventy eight 19.05 38.one 50.15 sixty.3 nine.five 169 15.6

 

Chain no. Pitch P (mm) Outer diameter of bushing d1 (max.) (mm) Diameter of pin d2 (max.) (mm) Top of sidebar h2 (max.) (mm) Interior width of slender stop b1 (max.) (mm) Outer width of slim end b2 (max.) (mm) Thickness of sidebar T (max.) (mm) Tensile power Q (min.) (KN) Excess weight for each meter q (kg/m)
WHX124 one zero one.6 36.five 19.05 38.one forty one.3 70 nine.five 224.six twelve.6
WHX124(H) a hundred and one.six 36.five 19.05 38.one 41.3 70 9.five 224.six 12.six
WHX132 153.67 forty four.forty five 25.25 fifty.eight seventy seven.1 111.76 12.7 378 twenty.5
WHX132(H) 153.sixty seven 44.45 twenty five.twenty five fifty.8 seventy seven.one 111.76 12.seven 378 twenty.five
WHX150 153.67 44.forty five 25.twenty five sixty three.5 77.1 111.76 12.seven 398 24.five
WHX150(H) 153.sixty seven forty four.45 25.25 sixty three.five 77.1 111.seventy six 12.seven 398 24.five
WHX155 153.67 44.45 28.42 63.5 seventy three.6 111.25 fourteen.27 411 27.7
WHX155(H) 153.sixty seven 44.forty five 28.42 sixty three.5 seventy three.6 111.25 14.27 411 27.seven
WHX157 153.67 44.forty five 28.fifty two 63.five seventy six.4 117.35 fifteen.88 552 29.1
WHX157(H) 153.sixty seven 44.45 28.fifty two sixty three.5 76.4 117.35 15.88 552 29.one
WHX124P 103.two 44.forty five twenty five.25 50.8 38.one seventy six.two 12.seven 378 27.9
WR124R one zero one.6 36.5 19.05 38.1 41.3 70 nine.5 169 12.six
WHX111 120.nine 36.5 19.05 38.one fifty seven.fifteen eighty four.eight nine.5 224.6 eleven.9

Our Rewards

For more than 20 years, we have targeted on the customized chains.

For much more than twenty many years, We have d100s of different types of industrial chains.

So we have a prosperity of customized chain expertise.

Here are some of the types of the chains.

Firm Profile

Certifications

Packaging & Shipping

 

US $1.2-10
/ Foot
|
100 Feet

(Min. Order)

###

Material: Alloy
Structure: Welded Chain
Surface Treatment: Polishing
Chain Size: Customize
Feature: Oil Resistant, Heat Resistant
Warranty: 1-2 Years

###

Samples:
US$ 0/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

Chain no. Pitch P (mm) Outer diameter of bushing d1 (max.) mm Diameter of pin d2 (mm) Height of sidebar h2 (max.) (mm) Inner width of narrow end b1 (max.) (mm) Outer width of narrow end b2 (max.) (mm) Thickness of sidebar T (max.) (mm) Tensile strength Q (min.) (KN) Weight per meter q (kg/m)
WH78 66.27 22.23 12.7 28.4 28.4 51 6.4 150 5.9
DWR78 66.27 21.2 14.28 32 28.4 51 6.4 130 6.4
DWH78 66.27 21.2 14.28 32 28.4 51 6.4 170 6.4
WR78B 66.27 22.2 12.7 28.4 28.6 51 6.4 93.4 5.9
WR78H 66.27 25.4 14.27 32 25.4 51 9.5 127 12.7
WH78H 66.27 25.4 14.24 32 25.4 51 9.5 158 12.7
WH78C 66.27 22.5 12.7 28.4 28.6 52.3 7 180 7.1
WR78SS 66.27 21.2 12.7 28.4 28 52.3 7 85 7.1
WR82 78.1 27 14.29 32 44 57 6.4 93.4 5.8
WR82R 78.1 25.4 14.29 32 44 57 6.4 150 5.75
WR82X 78.1 31.78 19.05 38.1 50.15 60.3 9.5 169 15.6

###

Chain no. Pitch P (mm) Outer diameter of bushing d1 (max.) (mm) Diameter of pin d2 (max.) (mm) Height of sidebar h2 (max.) (mm) Inner width of narrow end b1 (max.) (mm) Outer width of narrow end b2 (max.) (mm) Thickness of sidebar T (max.) (mm) Tensile strength Q (min.) (KN) Weight per meter q (kg/m)
WHX124 101.6 36.5 19.05 38.1 41.3 70 9.5 224.6 12.6
WHX124(H) 101.6 36.5 19.05 38.1 41.3 70 9.5 224.6 12.6
WHX132 153.67 44.45 25.25 50.8 77.1 111.76 12.7 378 20.5
WHX132(H) 153.67 44.45 25.25 50.8 77.1 111.76 12.7 378 20.5
WHX150 153.67 44.45 25.25 63.5 77.1 111.76 12.7 398 24.5
WHX150(H) 153.67 44.45 25.25 63.5 77.1 111.76 12.7 398 24.5
WHX155 153.67 44.45 28.42 63.5 73.6 111.25 14.27 411 27.7
WHX155(H) 153.67 44.45 28.42 63.5 73.6 111.25 14.27 411 27.7
WHX157 153.67 44.45 28.52 63.5 76.4 117.35 15.88 552 29.1
WHX157(H) 153.67 44.45 28.52 63.5 76.4 117.35 15.88 552 29.1
WHX124P 103.2 44.45 25.25 50.8 38.1 76.2 12.7 378 27.9
WR124R 101.6 36.5 19.05 38.1 41.3 70 9.5 169 12.6
WHX111 120.9 36.5 19.05 38.1 57.15 84.8 9.5 224.6 11.9
US $1.2-10
/ Foot
|
100 Feet

(Min. Order)

###

Material: Alloy
Structure: Welded Chain
Surface Treatment: Polishing
Chain Size: Customize
Feature: Oil Resistant, Heat Resistant
Warranty: 1-2 Years

###

Samples:
US$ 0/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

Chain no. Pitch P (mm) Outer diameter of bushing d1 (max.) mm Diameter of pin d2 (mm) Height of sidebar h2 (max.) (mm) Inner width of narrow end b1 (max.) (mm) Outer width of narrow end b2 (max.) (mm) Thickness of sidebar T (max.) (mm) Tensile strength Q (min.) (KN) Weight per meter q (kg/m)
WH78 66.27 22.23 12.7 28.4 28.4 51 6.4 150 5.9
DWR78 66.27 21.2 14.28 32 28.4 51 6.4 130 6.4
DWH78 66.27 21.2 14.28 32 28.4 51 6.4 170 6.4
WR78B 66.27 22.2 12.7 28.4 28.6 51 6.4 93.4 5.9
WR78H 66.27 25.4 14.27 32 25.4 51 9.5 127 12.7
WH78H 66.27 25.4 14.24 32 25.4 51 9.5 158 12.7
WH78C 66.27 22.5 12.7 28.4 28.6 52.3 7 180 7.1
WR78SS 66.27 21.2 12.7 28.4 28 52.3 7 85 7.1
WR82 78.1 27 14.29 32 44 57 6.4 93.4 5.8
WR82R 78.1 25.4 14.29 32 44 57 6.4 150 5.75
WR82X 78.1 31.78 19.05 38.1 50.15 60.3 9.5 169 15.6

###

Chain no. Pitch P (mm) Outer diameter of bushing d1 (max.) (mm) Diameter of pin d2 (max.) (mm) Height of sidebar h2 (max.) (mm) Inner width of narrow end b1 (max.) (mm) Outer width of narrow end b2 (max.) (mm) Thickness of sidebar T (max.) (mm) Tensile strength Q (min.) (KN) Weight per meter q (kg/m)
WHX124 101.6 36.5 19.05 38.1 41.3 70 9.5 224.6 12.6
WHX124(H) 101.6 36.5 19.05 38.1 41.3 70 9.5 224.6 12.6
WHX132 153.67 44.45 25.25 50.8 77.1 111.76 12.7 378 20.5
WHX132(H) 153.67 44.45 25.25 50.8 77.1 111.76 12.7 378 20.5
WHX150 153.67 44.45 25.25 63.5 77.1 111.76 12.7 398 24.5
WHX150(H) 153.67 44.45 25.25 63.5 77.1 111.76 12.7 398 24.5
WHX155 153.67 44.45 28.42 63.5 73.6 111.25 14.27 411 27.7
WHX155(H) 153.67 44.45 28.42 63.5 73.6 111.25 14.27 411 27.7
WHX157 153.67 44.45 28.52 63.5 76.4 117.35 15.88 552 29.1
WHX157(H) 153.67 44.45 28.52 63.5 76.4 117.35 15.88 552 29.1
WHX124P 103.2 44.45 25.25 50.8 38.1 76.2 12.7 378 27.9
WR124R 101.6 36.5 19.05 38.1 41.3 70 9.5 169 12.6
WHX111 120.9 36.5 19.05 38.1 57.15 84.8 9.5 224.6 11.9

Different types of drive chains

There are many different types of drive chains. You should be able to differentiate between roller chains, forged rivetless chains, double chains, flat-top chains, and helical chains by the terms used. This article will provide information on the different types of chains. Then, you can choose the right one according to your needs. If you haven’t purchased a chain yet, read this article to get started. It will also provide information on the pros and cons of each type.
chain

roller chain

There are several differences between drive chains and roller chains, but in essence, the two are functionally similar. The choice of which type to use depends largely on the type of environment it will be exposed to. While roller chains are suitable for clean indoor environments, they are not very forgiving when it comes to rubbing against the rails. Following are the main differences between a drive chain and a roller chain. Using the correct drive chain is essential for a smooth and efficient running machine.
Roller chain drive chains come in many different weights and tensile strengths. For light-duty applications, use a smaller pitch chain. For heavy-duty applications, use larger pitch chains. The design simplicity of these chains makes them ideal for a variety of applications. While they are great for a variety of applications, the durability of these chains makes them ideal for a variety of applications. Some of the main uses of roller chain drive chains are listed below.
When replacing the drive chain, be sure to follow the safety guidelines. The most important thing to remember is not to place the chain on a dirty floor as it may cause stretch or damage. After removing the chain from the sprocket, apply the measured load specified by ANSI to it. If the load exceeds this value, the chain may bend. A suitable load for measuring a drive chain should be at least six links.
While roller chains are usually made of carbon steel, some are made of stainless steel and are used in food processing machinery. In these environments, the chain may be made of stainless steel for lubrication. Brass and nylon are also sometimes used to meet these requirements. Regardless of the application, however, choosing the right drive chain is critical to the success of a roller chain machine. It is important to maintain the proper balance between the roller chain and the machine.
To properly use a roller chain, first determine the size of the sprocket used for the drive. The size of the chain should be smaller than the smallest sprocket to prevent tooth interference and provide adequate winding on the smaller sprocket. A good practice is to choose a drive chain with a center distance of 30 to 50 times the chain pitch. The longest possible center-to-center distance is approximately 80 times the chain pitch but is not recommended for high-speed applications.

Drop forged rivetless chain

Drop-forged rivetless drive chains are made of drop-forged steel components. Their proportions are suitable for strength and lightweight. Forged rivetless chains are generally divided into three types. Each of these types has its own set of important specifications. Key topics include minimum ultimate tensile strength, chain length tolerances, and link dimensions. Read on to learn more about each type and its uses.
One of the main features of forged rivetless chains is that, despite their relatively low price, they are designed to be very durable. The quality of a forged chain depends on the structure and design of the chain. The manufacturer of this type of drive chain is CZPT, which has a large stock of these chains. The chain is proof tested after assembly and comes with a two-year parts replacement warranty.
Forged rivetless chains are available in a variety of pitch sizes and strength grades. They are made of cast manganese or alloy steel and have an average strength of 24,000 to 300,000 pounds. These chains are suitable for automotive, conveyor, and material handling as well as meat packaging, sugar processing, and steel mill applications. They are also widely used in conveying systems. To ensure quality and performance, manufacturers offer a variety of forged chains.
CZPT offers forged CZPT drive chains for fatigue-free operation. The chain includes a solid one-piece forged drive pawl for optimum durability. Chains are available in Figure 8 and in D-shape styles. For more information, please contact CZPT directly. Custom Drop-Forged rivetless drive chains can be ordered. Manufacturers also offer custom chains for specific application needs.

double chain

Duplex drive chains have two sets of rollers instead of one, producing twice the power. Double chain roller chains have pins and roller bearings, while triple chain chains have an extra row of plates to accommodate the three sprockets. They are usually interchangeable with each other. They are available for US, UK, and ISO standards. They are made of carbon steel, stainless steel, and nickel or nickel-plated.
chain

flat top chain

Flat-top drive chains are ideal for curved or straight tracks and come in many different types and thicknesses. These chains are highly resistant to wear and are usually made of steel, stainless steel, or plastic. CZPT manufactures special brands of flat-top chains with high wear resistance and excellent noise reduction. In addition to being versatile, flat-top chains can be used in a variety of industrial applications.
There are two main types of CZPT chains: solid top or raised rib. One piece is formed from a single unit link and the other has roller base links for added strength. The two-piece chain combines flat tabletop links and a roller bottom chain for added strength. These chains are available in widths up to 20 feet and are available in a variety of widths. These chains are available in stainless steel, cast iron, or plastic.
The hinge pin is another important part of the flat top chain system. Support chain plate to ensure smooth conveying. The hinges are available in single hinge pin and double hinge pin styles. Standard hinge pins are designed for straight, narrow-width chainplates; double hinge pins are designed for longer, heavier products. The hinge pins also come in many different materials, including aluminum and galvanized steel. This allows for customization based on machine design, operating conditions, and drive method.
Whether your flat-top chain conveyor system is large or small, a high-quality flat-top chain will get the job done. With their low maintenance and low maintenance design, these chains are easy to clean and maintain. They can accommodate workpiece pallets of various sizes, and their flexibility makes them ideal for many different applications. They can also be highly customized for various industries. So if you need an industry-specific conveyor, then a flat-top drive chain is the way to go.

China Steel Heavy Duty Narrow Series Transmission Welded Roller Conveyor Chain     roller chain couplingChina Steel Heavy Duty Narrow Series Transmission Welded Roller Conveyor Chain     roller chain coupling
editor by czh 2023-01-13