DTH Hammer Breakout Bench Chain Section Equipment

DTH Hammer Breakout Bench Chain Section Equipment

Technical specs
one. For disassembling the dth hammer
2. Simple procedure
three. Minimal cost
four. For three” to 30″ hammers
5. CE certification

DTH Hammer Breaout Bench

It truly is a kind of bench to disassemble the dth hammers. The hammers variety can be three” to thirty” (76mm to 760mm).

The procedure strategy as beneath:
one). Set hammer on the bench.
2). Modify the placement of the hammer and wrench Use wrench to block the prime sub facet of hammer Enable wrench and jack in the very same confront.
three). Resolve K-shaped base with nut.
4). Resolve wrench with nuts.
five). Shake manage of jack slowly and gradually until prime sub away from hammer.
6). After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and flip all around the hammer.
seven). Adjust the position of hammer and wrench Use wrench to block the travel chuck of hammer Permit wrench and jack in the same face.
eight). Repair hammer
nine). Correct K-formed foundation and the wrench with nut.
10). Shake take care of of jack gradually until drive chuck away from hammer.

Model BLHB-five BLHB-8
Run hammers three-five” six-8″
Size 920mm 1100mm
Width 510mm 620mm
Peak 875mm 875mm
Fat 200kg 230kg

 

DTH Hammer Breakout Bench Chain Section Equipment

Tags